Service Profile Mobility - HyperV

[Raghavendra Barengala Sripada Rao]

All,

I am running UCS 2.2 (x) and testing service profile mobility for Hyper-V (windows 2012) and when I dis-associate from B200 M3 blade and try to associate to a new blade it's not seeing the boot LUN. 

The service profiles are identical and they are from a same service profile template. Please let me know if I am missing anything.

Thank you!

Best Regards,

Rags

[Walter Dey]

Can you please clarify !

You assoicate a SP to a blade; then you change the association of this SP to another blade ? This will (must) definitely work.

You talk about service profiles; are therefore talking about different SP's ? if this is the case, they will have of course different initiator pwwn, and therefore don't see the boot lun.

Walter.

[Keny Perez]

I totally agree with Walter... use the below posts to help your self troubleshoot the issue you are having... there are too many details pending in this moment....

https://angryjesters.wordpress.com/2012/01/05/cisco-vic-boot-from-san-troubleshooting/

http://jeffsaidso.com/2012/02/ucs-boot-from-san-troubleshooting-with-the-cisco-vic-part-2/

HTH,

-Kenny