Service Profile not avaliable

[fr.mueller]

Hello community,

today, i receive the message from one of our Servers, that the service profile is not available. 

First message: Service profile ESX48 cannot be accessed

Second message: Connectivity between the CIMC and one of the FIs is down. Connectivity may be down for expected reasons (e.g. FI/CIMC firmware upgrade).

Third message: Server 3/1 (service profile: org-root/org-ESXi/ls-ESX48) inaccessible

All messages get cleared some seconds later.

We are using the firmware Version: 4.1(3c)

Server Version: B200 M5

Any ideas where that come from?

Thanks

Frank

[Brian Morrissey]

If the operating system on the blade continued to run without any issues during that time and you only saw those messages it is usually indicative of a CIMC reboot.  If no known maintenance was going on at the time it would be a good idea for TAC to check the logs to see what exactly happened.

[fr.mueller]

Today i have the message again. Because there are at the moment no running vm´s on that cluster, we do not have any outage. But before we add new vm´s, i wan´t to know whats going on.

I have opened a case.

As far as i have news, i will share them here.

Frank