cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1354
Views
2
Helpful
1
Replies

UCS and ESXi 5.5

Mike Erter
Beginner
Beginner

Hi UCS Users!

We run ESXi 5.1 on UCS B200 and B230 and it works great-

We're about to build out our first ESXi 5.5 cluster and I am just wondering if there are any issue with ESXi 5.5 on UCS that anyone has run into?

I know it's a broad question, but you never know.

Thanks!

1 Accepted Solution

Accepted Solutions

vincehil
Enthusiast
Enthusiast

Please check the Hardware and Software Interoperability Matrix:Cisco Unified Computing System - Technical References - Cisco

Here's the latest:

http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2-21.pdf

Check your Virtual Interface Card or adapter to make sure you're in a support configuration!

NB: AFAIK,  the Palo/M81KR certification is in process, but expected soon.

View solution in original post

1 Reply 1

vincehil
Enthusiast
Enthusiast

Please check the Hardware and Software Interoperability Matrix:Cisco Unified Computing System - Technical References - Cisco

Here's the latest:

http://www.cisco.com/c/dam/en/us/td/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2-21.pdf

Check your Virtual Interface Card or adapter to make sure you're in a support configuration!

NB: AFAIK,  the Palo/M81KR certification is in process, but expected soon.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers