01-07-2014 06:24 AM - edited 03-01-2019 11:26 AM
Hi,
We have UCS C220 M3 hosting Unified Comminications application CUCM CUC IM&P UCCX.
In CICM / Storage : Cisco FlexFlash appears with a warning "Raid Degraded" because there is only one SD card provided by default in the server. We have no use of it and it is in state "Disconnected".
Q: Is it possible to disable this warning
Solved! Go to Solution.
01-07-2014 12:09 PM
Hi Rich,
Do you have the OS installed on the SD card? If you do you will have to install the second SD card and sycn the hypervisor partition. If you are not using the SD card and you want to get rid of this message you will have to remove the SD card from the server and reboot the CIMC (See release notes below).
Cisco Flexible Flash Controller
http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/OL-28995-01.html
01-07-2014 12:09 PM
Hi Rich,
Do you have the OS installed on the SD card? If you do you will have to install the second SD card and sycn the hypervisor partition. If you are not using the SD card and you want to get rid of this message you will have to remove the SD card from the server and reboot the CIMC (See release notes below).
Cisco Flexible Flash Controller
http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/OL-28995-01.html
01-08-2014 04:48 AM
Hi Manuel,
Thank you for your answer.
Nothing installed on the SD card. ESXi installed on the Raid5 array.
Kind Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide