cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
528
Views
5
Helpful
1
Replies

UCS C460 Bios not detect raid

husaini13
Level 1
Level 1

Hi all,

i have 2 ucs c460, 1st ucs i can boot into webios to create raid

the other 1, pressing ctrl+h , still cant boot into webios

when i check bios at boot options, there is no pci raid adapter detected, only cdrom,network card and efi shell

but at cimc the raid card detected.

please help

1 Reply 1

Keny Perez
Level 8
Level 8

Hello,

Go to BIOS in the Server tab, then Advanced and then scroll down to the Option ROM (OPROM) settings and disable the Option ROM for all cards except for the RAID controller (if you will boot from local disks)

Note: the OPROM enabled will tell the system to look for a "boot" image through that card, so if you will only boot from local disks (does not matter if you want to have remote data stores, this will not affect your connection to remote storage) disable all OPROM options for all the cards except for the RAID controller.

HTH,

-Kenny

Review Cisco Networking for a $25 gift card