04-02-2012 07:42 AM - edited 03-01-2019 10:21 AM
Hi,
I have one Cisco UCS chassis with two fabric extenders & one fabric interconnect.
Can we connect two fabric extenders (2208XP) with one fabric Interconnects?
Will this provide redundancy to the blade servers If one extender fails?
I know I am missing one fabric interconnect here but now I have only these components.
Regards,
Anser
04-02-2012 08:18 AM
Hello Muhammad,
No, the fabric extenders may only be connected to a single FI. Redudancy can only be achieved with two Fabric Interconnects.
Matthew
04-03-2012 06:02 AM
Can we install Windows Server OS directly on the blade server without VMware?
04-03-2012 06:11 AM
Hi Anser,
yes you can install the windows OS directly on the blade with no VMWare needed.
Any OS listed under the supported OS section in the following URL can be installed directly on the blades:
http://www.cisco.com/en/US/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2_0.pdf
Thanks!
Abhinav
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide