Hi I have an issue with a simple ucs setup
ucs setup:
2 x fabric interconnects
connections (same on both)
port 1 & 2 - server ports to left / right 2208xp io modules
port 3 & 4 - uplink to switch
port 5 & 6 - set as appliance ports - connected to netapp fas
the storage (netapp) is set as iscsi - and should be using 2 x nics - but the data paths are not all showing
nothing is shown in ucs manger why, but in unable to ping ip;s that should work
was total lost then i saw this on nagios:
Port Ethernet1/5: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/6: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2074: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2076: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2078: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2079: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2081: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2084: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2110: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2112: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2115: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2116: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2118: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2121: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2164: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2167: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2169: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2170: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2180: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2183: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2185: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Vethernet2186: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/1/2: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/1/4: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/1/6: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/1/8: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/1/10: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/1/12: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/1/14: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/1/16: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/1/18: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/1/20: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/1/22: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!),
Port Ethernet1/1/24: shutdown due to security violation (Violation Count: 0, Last Mac: )(!!)
any ideas why these have shutdown? (note in ucs manager these as up!)
