01-22-2021 07:52 PM
Hi,
We have a spare Cisco UCS B200 M2 server and we used it to replaced a defective server in the UCS chassis. We disassociated the Service profile from the defective one and associated it to the spare. After booting the spare server, we got the following error in Faults and was unable to detect boot image from SAN. Any idea what caused the problem?
Thanks,
Justi
01-23-2021 11:03 AM
It looks like the LUN may not be accessible, but hard to tell with just that screen capture. You can use this document for some troubleshooting guidance:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide