09-30-2020 06:00 PM
Hi,
Is it ok to upgrade the cimc of cisco from 3.0(3a) to 4.1(2a) or i just need to upgrade it to 3.0(4a)?
Thank you
Solved! Go to Solution.
10-01-2020 05:45 AM - edited 10-01-2020 05:46 AM
Thank you Leo for pointing to my post
Those iso files are direct downloads from cisco.com. You do not want any application to make it a iso files. See below post.
https://mrncciew.com/2019/09/06/cimc-upgrade-8540-5520-wlc/
What hardware model is it?
HTH
Rasika
*** Pls rate all useful responses ***
09-30-2020 07:57 PM - edited 09-30-2020 08:01 PM
You can go "straight" upgrade from 3.X to 4.X.
NOTE:
If you read the Release Notes, the procedure to upgrade the CIMC firmware is incomplete and confusing. @Rasika Nayanajith has knocked up a detailed step-by-step process (LINK) that I find very useful.
WARNING:
CIMC upgrade can take, on average, 70 minutes. During this time, the server is off.
09-30-2020 08:37 PM
Hi,
Thank you for this guide, i will try it now.
09-30-2020 10:02 PM
Hi,
Im having an error when it say's he is copying some files error code 906....i used rufus application to make a bootable ISO...the firmware i install is 4.0(2a)...any work around for the problem?
Thank you
10-01-2020 05:45 AM - edited 10-01-2020 05:46 AM
Thank you Leo for pointing to my post
Those iso files are direct downloads from cisco.com. You do not want any application to make it a iso files. See below post.
https://mrncciew.com/2019/09/06/cimc-upgrade-8540-5520-wlc/
What hardware model is it?
HTH
Rasika
*** Pls rate all useful responses ***
10-01-2020 10:03 AM
Hi,
Thank you for this i've successfully upgraded the cimc version.
the hardware model is C240 M4
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: