10-15-2013 02:25 PM - edited 03-01-2019 11:18 AM
According to
usNIC is only supported for standalone c-series server, with VIC-1225 and RHEL
Any plans to support this for UCSM managed c-series (connected with FEX to FI), and additional OS, e.g. W2012 R2 ?
10-16-2013 07:10 AM
Hello Walter,
UCSM 2.2 ( next major release ) is planned to include usNIC feature for both blade and ucsm-managed rack servers.
Padma
10-16-2013 07:57 AM
Thanks Padma
Does it mean, VIC-1240 and VIC-1280 will support usNIC for blades and VIC-1225 for rack-mounts ?
Any other OS support, besides RHEL ?
V2.2 = El Capitan ?
10-16-2013 07:59 AM
Does it mean, VIC-1240 and VIC-1280 will support usNIC for blades and VIC-1225 for rack-mounts ?
>>>> Yes
Any other OS support, besides RHEL ?
>>>> Looks like it is not planned but you can confirm with your sales engineer.
V2.2 = El Capitan ?
>>> Yes
10-16-2013 11:14 AM
Btw. can you publish any performance numbers (latency, throughput) for usNIC ?
10-16-2013 11:12 PM
Hello Walter,
usNIC dev team actively write blogs under HPC and you might get better response for your questions / comments to those posts :-)
http://blogs.cisco.com/performance/ultra-low-latency-ethernet-questions-and-answers/
http://blogs.cisco.com/performance/
HTH
Padma
10-24-2013 10:47 PM
Hello Walter,
Based on the feedback, OpenMPI is not supported on Microsoft OS and so no usNIC support.
Performance numbers are currently available under NDA.
Padma
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide