03-22-2019 05:47 AM
This is my first time working in UCS so this might be something super simple I am overlooking.
I have two vNICs that are in the wrong PC and Im not sure how to change that. PC-32 & 33 is for data and PC- 42 & 43 are for iSCSI, the iSCSI boot to our equallogic keeps sitting in PC 33 instead of 43. This is only happening to 2 out 8 of my blades. Anyone able to point this newbie in the right direction to change this? Thanks!
03-22-2019 09:56 AM
Never mind, I figured it out finally.
03-26-2019 02:25 PM
Can you post the resolution here
03-27-2019 04:34 AM - edited 03-27-2019 10:16 AM
If you have vnics/veths showing pinned to an uplink that you don't expect, than you have an issue with either the assigned vlans at the vnic level, a static pinning policy,,, or you have an incorrectly configured disjoint layer2 config, and need to prune the un-intended vlans from the uplinks you don't want them on.
Kirk...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide