Which VMWARE license is to be bought with cisco ucs220 to build a vmware vsan certied server solution
Server is Cisco UCSC-C220-M6S UCS C220 M6 Rack w/o CPU, mem, drives, 1U wSFF HDD backplane
Each Server has 2x UCS-CPU-I6326 Cisco Intel Xeon Gold (3rd Gen) 6326 Hexadeca-core (16 Core) 2.90 GHz Processor
Processor Core: 2xHexadeca-core (16 Core)
Below is the requirement
SERVER SHALL BE DELIVERED WITH TWO (2) INTEL XEON GOLD 6326 2.9G; 16C/32T; 11.2GT/S; 24M CACHE; TURBO; HT (185W) DDR4-3200
VSAN CACHE TIER HARD DRIVES
SERVER SHALL BE DELIVERED WITH ONE (1) 800GB SSD SAS ISE WRITE INTENSIVE 12GBPS 512E 2.5IN HOT-PLUG AG DRIVE; 10 DWPD;
VSAN CAPACITY TIER HARD DRIVES
SERVER SHALL BE DELIVERED WITH FOUR (4) 2.4TB 10K RPM SAS ISE 12GBPS 512E 2.5IN HOT-PLUG HARD DRIVE
STORAGE CONTROLLER
SERVER WILL BE EQUIPED WITH VMWARE VSAN CERTIFIED INTERNAL STORAGE CONTROLLER
OPERATING SYSTEM BOOT DEVICE
SERVER SHALL BE SUPPLIED WITH ONE (1) OPERATING SYSTEM BOOT OPTIMIZED CARD WITH TWO (2) M.2 STORAGE CARDS. EACH M.2 STORAGE CARD
SHALLPROVIDE A MINIMUM OF 240GB STORAGE. THE M.2 STORAGE CARDS SHALL BE REDUNDANT AND CONFIGURED AS RAID-1.
OPERATING SYSTEM:
VMWARE ESXI 8 LATEST VERSION SHALL BE PREINSTALLED (LICENSE NOT INCLUDED)
PHYSICAL MEMORY
SERVER WILL BE SUPPLIED WITH TOTAL 256GB PHYSICAL MEMORY
NETWORK INTERFACE CARDS
SERVER WILL INCLUDE THE FOLLOWING NETWORK INTERFACE CARDS;
ONE (1) Intel X710-T2L Dual Port 10GbE BASE-T; OCP NIC 3.0
ONE (1) Intel X710-T2+F1L Dual Port 10GbE BASE-T Adapter; PCIe Low Profile
NETWORK INTERFACE CARDS SHALL BE VMWARE VSAN READYNODE CERTIFIED
