Hello All
we need help for C460 with BCM57711
#our enviroments
C460 M2 E7-4807, 64Gb RAM
Windows server 2003 x64 enterprise edition (yes we know that cisco not support this OS)
BCM57711
this is the symptom :
1. driver allready install
2. plug to Cisco Switch (cat6, port Fastethernet 0/x):
C460 NIC led :led indicator not up
from windows server 2003 : network cable is unplugged
from cisco switch : led indicator ligh up (green)
2a. plug to Cisco Switch (cat6, port Gi 1/x):
C460 NIC led : led indicator ligh up but only one port
from windows server 2003 : network cable is unplugged
from cisco switch : led indicator ligh up (green)
3. plug to C210 (straigh cable, port LOM intel 82576)
C460 NIC led :led indicator not up
C210 NIC led : led indicator ligh up (green)
from C460 - windows server 2003 : network cable is unplug
from C210 - windows server 2003 : led indicator ligh up (green)
4. Policy config BCM57711:
NIC 1 : copper PHY
NIC 2 : copper PHY
5. from BCM57711 network properties : cannot set speed to 1Gb . The Speed only 10Gb
Best regards