cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Field Notice 70545
2086
Views
1
Helpful
1
Replies
scotthan
Cisco Employee

Cisco UCSM 2.1(1b) Released

A new UCSM patch release is available for download on cisco.com: patch release 2.1(1b). Links to download this release are as follows:

Release notes are available at:

http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/UCS_28313.html

Release 2.1(1b) adds support for the following:

  • Cisco UCS B200 M3 blade server configurations with a single CPU
  • BIOS Policy Settings – Provides the ability to select refresh interval rate for internal memory.
  • Memory Speed – Enables 1333 MHz memory speed for 8GB/16GB 1600-MHz RDIMMs populated with 3DIMMs Per Channel/1.5v on the Cisco UCS B200 M3 blade server and Cisco UCS C240 M3 rack server.
  • Call Home – Enables you to configure call home for CMOS battery voltage low alert.

 

The following caveats are resolved in the 2.1(1b) release:

Bug ID

Description

CSCud56660

Duplicate license IDs will no longer cause LicenseAG process to core.

CSCud10237

The eight default port licenses for flexible GEM on the FI will be available for use.

CSCud60746

When Call Home is enabled, the fabric interconnect no longer reboots with the following reset reason:

Service: callhome server hap reset 

CSCue38650

The UCSM PSU policy and IOMs are no longer out of sync after the IOMs are rebooted.

CSCud70368

UCS Central is now correctly creating the crossdomain.xml file on UCSM member domains.

CSCud40412

When regenerating a new keyring or certificate, the new certificate is now successfully published to the FI webserver and can be obtained by the http process.

CSCud53700

The portAG process no longer crashes while activating the Fabric Interconnect NX-OS software during upgrade.

CSCud59230

Port channels no longer go down after upgrading to UCSM 2.1.

CSCub22238

The Cisco UCS 6100 Series Fabric Interconnects no longer contain a vulnerability in the Netconf interface.

CSCud20253

Power capping on the Cisco UCS B420 blade server can now support 32GB DIMMS.

CSCue46817

After upgrading to Release 2.1(1b) or higher, a Cisco UCS B440 M1/M2 blade using a RAID key attached to a LSI MegaRAID SAS 9260 will no longer generate a "Missing RAID Key" fault alert.

CSCud27494

Traffic to a blade server will no longer be dropped and forwarded to another working link when an uplink is shutdown either on the fabric interconnect or from the upstream switch.

CSCud54919

On blade servers that are not associated with a service profile, CIMC could not respond from UCS Manager at the same time.

CSCuc38555

Legacy USB support items can no longer be changed in the BIOS setup.

CSCud19629

FCoE Uplink interface faults are now visible in the Cisco UCS Manager GUI.

CSCud20765

When defined through a service profile template, SRIOV virtual functions (VFs) are no longer populated incorrectly in the instantiated service profiles.

CSCuc44209

Cisco UCS Manager no longer displays the names for PSUs connected to a Cisco Nexus 2200 Series FEX in reverse order.

1 REPLY 1
scotthan
Cisco Employee

A newer version is available - see this post -> https://communities.cisco.com/message/117438#117438

Content for Community-Ad