cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Field Notice 70545
589
Views
0
Helpful
3
Replies

Cisco UCSM Emulator

Hello Community,

I'm practising with the Cisco UCS Manager Emulator, however I'm having a problem resolving the servers, see image. Can someone let me know where I'm going wrong?

Carlton

cpatte7372

3 REPLIES 3
Keny Perez
Collaborator

I dont use the emulator that much but for what I understand, you need to select your hardware.. did you select the blade you want to use?

That "Needs resolution" usually shows up in the real UCSM when you decomission a blade and you have not removed it.

 

-Kenny

Grace Zhu
Cisco Employee

Right click on the blade picture, click on resolve slot issue, there will be a link, click on the link to accept the blade, then you can re-ack the blade

Grace Zhu
Cisco Employee

Also, you will not be able to re-ack the blade until identifying step is complete.  You can watch the progress in FSM.  When it reach 100%, the re-ack link will be available for you.

Content for Community-Ad