cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
500
Views
0
Helpful
1
Replies
Beginner

How to look at fcoe nameserver db from UCS

Hi,

If my UCS FI has no upstram SAN and no upstream LAN, how do i verify the name serve database? How do i verify if the server has logged into the fabric or local attached storage from the UCS FI? Appreciate your response.

Thanks

Everyone's tags (4)
1 REPLY 1
Highlighted
Beginner

How to look at fcoe nameserver db from UCS

Hi,

I have found a way to look at the fcoe database.

From UCS interconnect, do connect nxos and then show flogi database. But i am not sure if the command output is a legitimate one as UCS FI CLI guide does not mention about it.

cisco-A-A# connect nxos

cisco-A-A(nxos)# show flogi database

--------------------------------------------------------------------------------

INTERFACE        VSAN    FCID           PORT NAME               NODE NAME

--------------------------------------------------------------------------------

vfc757           1025  0xee0000  20:00:00:10:18:6f:d2:03 10:00:00:10:18:6f:d2:03

vfc758           1030  0x7d0001  20:00:00:10:18:6f:d2:5d 10:00:00:10:18:6f:d2:5d

Total number of flogi = 2.

cisco-A-A(nxos)#

Thanks,

CreatePlease to create content