Looking to script a one-time boot order change on UCS Blade (PowerShell)
I am wanting to be able to modify a UCS Blade to have a one-time boot boot order change so it boot from LAN rather than iSCSI. I see that on the IMC Module there is a Set-IMCOneTimeBootDevice. Is there anything like this for the UCS Blades? I have currently been going around in circles trying to find it.
I am fairly experienced with PowerShell, but I have not accessed the UCS via PowerShell much and finding it a bit confusing to navigate. Any help would be appreciated.
Upload the Script to Datastore
1. Browse to any Datastore of ESXi Host2. Upload the folder "lsigetvmware_022817" ex. Suppose the datastore name is "Datastore3"
Run the Commands
Enable SSH of ESXi Host
SSH to ESX...
SymptomsCisco Prime is unresponsive. Web GUI will not load. Device doesn't respond to ping.DiagnosisPrime chassis is off.SolutionSince the CIMC uses Flash you can no longer use your bowser. SSH to CIMC address instead. show chassis detailChassis:Powe...
Very first data cloud — Evolution of data lake to hybrid cloud
Today, in this digitized world, data is being generated at a very high rate and from many different sources, and it is growing exponentially in many use ca...
PXE (Preboot eXecution Environment) Server allows unattended or automated OS installation over the Network. The main benefit of pxe is that we don’t need any bootable drive to boot OS(Operating system) and we do not need to to burn any ISO file into DVD o...
New episode on the Cisco UCS X-Series Modular SystemListen: https://smarturl.it/CCRS8E23 Follow us: https://twitter.com/CiscoChampion The Cisco UCS X-Series Modular System simplifies your data center, adapting to the unpredictable needs of...