Trying to repurpose UCS m220 previously used for something else; can't see anything on the external monitor
I have a couple of UCS m220 servers which used to work together in some sort of cluster They were decommissioned and I am now trying to repuprose them I have never touched an UCS before and I just started reading about is
Can anybody tell me how to reset these systems to factory default?
I have tried the common sense solution which was to connect a monitor to the rear side connector and an USB keyboard but nothing happened, even after I shortly plugged and unplugged the power cord of the device.
The monitor stayed blank (it was setup to auto scan the input so no problem there) and the keyboard was not being powered up. I connected the keyboard to my laptop and it worked
The only thing that I can try would be the console (I only tried 56700 as speed; I read that 115200 ) but I expect to hit a login prompt for which I have no passwd
What do you guys recommend me to do ?
In a larger context, if I plan to use these just as servers with their internal HDD (SDD) do I need to learn UCS and all that? What would be a quick guide to get me off the ground?
I was looking for a solution to automate the control of my home VMware servers to save on the power draw by booting them only when needed (vs leaving them running 24x7). The average UCS C-series server costs between $40 to $60 per month to run continuous...
Hi,Working on HX Edge install. Receiving this error VMkernel gateway address to xx.xx.xx.xx as there are no VMkernel interfaces on the same network with that IP address.', One thing to point out is that the servers came with 1G and we replaced i...
Cisco UCS Platform Emulator, Release 4.1(2cPE1)
CONFIGURATION IMPORT NOTE: Importing configuration backups (All, System, or Logical) taken from the UCS Platform Emulator (UCSPE) to physical UCS Manager domains is not recommended or supported...
While this same information is already scattered around the internet, I wanted to present this in a format that is hopefully easily usable by someone that is not powershell savvy, and needs a quick way to track down duplicate MACs.
Apache Spark has been the de-facto standard and world’s leading data analytics platform for implementing data science and machine learning framework.
Spark 3.0, with native GPU support, is something that almost every data scientist and d...