UCS Powertool command to configure Global SEL Log Policy

[AdilMarwane3845]

I need help finding the Powertool command to configure UCS Global SEL Log Policy, Not the actual backup of the blade SEL log. The Command I am looking for would do the same effect as the configuration steps described the link below:

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System-Monitoring/3-1/b_UCSM_GUI_System_Monitoring_Guide_3_1/b_UCSM_GUI_System_Monitoring_Guide_3_1_chapter_01001.html#task_412247AC919545FFA93CECAA01D67CC1

[Kirk J]

Poking around with the ISE utility with UCSM and UCS central modules loaded, I don't see that.

Not every function is available via powertool cmdlets.

You might want to try posting over in https://community.cisco.com/t5/cisco-developed-ucs-integrations/cisco-ucs-powertool-suite-powershell-modules-for-cisco-ucs/ta-p/3639523 and let them know you are looking for that.

Kirk...

[Larry Hedrick]

Maybe try something like this...?
Get-UcsSysdebugMEpLogPolicy | Get-UcsSysdebugBackupBehavior | Set-UcsSysdebugBackupBehavior -Proto ftp -Hostname 1.2.3.4 -RemotePath /UCS/SEL -Interval never -Format ascii -ClearOnBackup true -User anonymous -Action log-full,on-clear