Hi,
I have an issue with Vlan 1 on the UCS (Version 2). the setup is as follows
Fabric Interconnect (port channel - trunk) --> Nexus 5K (Port Channel trunk) --> 6500
Esx 4.1 is installed on each Blade server.
All vlans are working normally except Vlan 1 (Vlan 1 is used in our enviroment)
all truncks between N5K and 6500 have vlan 1 as native.
how should I configure the Vmware Distributed Switch and UCS Server Profile ( vNic Native Vlan) and FI (Native Vlan)?
Thanks