Hello Team, I would like to know if Cisco call manager can generate administrator activity and event logs and forward it to a third party application for security related monitoring purpose? Call Manager Version: 11.5Best Regards,
Hello Team, I would like to know if Cisco call manager can generate administrator activity and event logs and forward it to a third party application for security related monitoring purpose? Call Manager Version: 11.5Best Regards, Vishal
Hello All,
I have below configuration for my SIP phone Registration on my H323 voice gateway.
I have cisco 8841 SIP phones & which are not falling back into SRST.
Config detail;
voice register global mode esrst source-address 130.9.200.114 port 506...
Hello All,My customer is running CME 11.6 with LPCOR & PIN feature for International calls.Now below is the detail of issue which I would like to highlight and need a permanent solution on the same. Note 1: PIN feature is only use for SCCP phones a...
Hi All,
I have 8811 SIP phones for which I have configured voicemail features. SIP phones MWI light is not working even though my extensions are getting messages.
Any specific configuration require for SIP phones.
voice register global mode cme ...
Hello Jamie, Thank you for your response. Above link lead us to check CUCM Audit logs, which needs to be analyzed. CUCM administrator need a specific skill to read these logs. Considering management point of view, how we can directly monitor the tas...
Hello All,
Below are some more errors from SRST - Gateway.
SGHSHJ-MDF-VG01#SGHSHJ-MDF-VG01#SGHSHJ-MDF-VG01#SGHSHJ-MDF-VG01#SGHSHJ-MDF-VG01#SGHSHJ-MDF-VG01#000235: *Nov 21 15:36:09.919 UAE: //-1/xxxxxxxxxxxx/SIP/Info/info/1024/httpish_msg_create:...
Yes, I do have this command under my CME;
sip-ua
mwi server ipv4:10.105.61.2 unsolicited
I have followed few documents and configured unsolicited configuration on both side - CME & CUE but did not worked out for me.
what are the traces level and h...
Hello Jonathan,
I am looking for GUI platform for SIP phones which allow me to do changes of speed dials, forward all, etc, features.
Please let me know if you have any idea on the same.
Thanks,
Vishal