About ossniper

ossniper · 08-11-2022

Hello I really need help with a cisco nexus 5548 switch. It's not accepting input from the keyboard.It keeps showing this messages. I am wondering if it's my console cable or is this a bug or something else. Picture attached. I will appreciate a re...

ossniper · 02-13-2022

Hello. Please, I really need help as I am trying to sort out an issue at work.I am working for a startup company and just acquired a /22 Public iP address. I have 2 Upstream ISP and one downstream customer connection via ebgp.I decided to advertise t...

ossniper · 11-26-2021

Good day, Please i am still learning BGP, although at work i just acquired a /22 public IP address and ASN. i have configured eBGP and peered with my 2 upstream. The problem i am having is /22 ip address is not showing on my routing table via network...

ossniper · 11-02-2021

I am having issue with eBgp configuration and will appreciate your feedback and guidance. BGP is active, but i am not learning route or advertising prefixes. the upstream ISP are not learning prefixes from my end. i have advertised my network, yet st...

ossniper · 12-10-2020

Hello I really help. I am trying to install NCS540-iosxr-k9-6.6.3.tar Packages, but keep getting this messages: PS: I have installed this image on other routers (via cli ) which was successful and working fine, but i am finding it extremely difficult...

ossniper · 02-15-2022

I am grateful for the amount of time and effort you put into helping me out. I appreciate your insight and will like to ask if it's feasible to configure it this way ip route 102.100.0.0 255.255.252.0 Null0ip route 102.100.0.0 255.255.254.0 null0 1...

ossniper · 02-15-2022

Thanks so much. I finally resolved it by removing all /30 and /24 and use the network statement to announce only the whole /22 network and /23 network for load balancing.. ip prefix-list FIRSTBLOCK seq 5 permit 102.100.0.0/23ip prefix-list 2NDBLOCK s...

ossniper · 02-14-2022

Yes. The customers are downstream to my router... Some of the customers are going to be allocated between a /29 or /30 public ip address.

ossniper · 02-14-2022

I am the one providing the new customer a /29 network. How will i advertise the /29 network so they can reach the internet since my two ISP will only accept the longer prefixes and i can only advertise between /24 - /22. Thanks.Osman Akin

ossniper · 02-13-2022

The /22 IP address was acquired from AFRINIC. ip route 102.100.0.0 255.255.252.0 Null0 ip route 102.100.0.0 255.255.254.0 100.100.10.1 to ISP-2ip route 102.100.2.0 255.255.254.0 200.200.20.1 to ISP-1 I want to be ab...

Member Since	‎02-24-2020 09:20 AM
Date Last Visited	‎12-26-2024 10:19 AM
Posts	24
Total Helpful Votes Received	5

User Statistics

User Activity

Nexus 5548 Switch error

Advertising smaller IP address with eBGP and reach the internet.

ebgp advertisement with /22 on ASR1x

ebgp config not advertising prefixes

issues installing packages: NCS540-iosxr-k9-6.6.3

Re: Advertising smaller IP address with eBGP and reach the internet.

Re: Advertising smaller IP address with eBGP and reach the internet.

Re: Advertising smaller IP address with eBGP and reach the internet.

Re: Advertising smaller IP address with eBGP and reach the internet.

Re: Advertising smaller IP address with eBGP and reach the internet.