About SamUrai

SamUrai · 10-03-2024

Hello,I came across an option to download the server h/w inventory from CIMC. I would like to know if one can download it via an API call?Thanks

SamUrai · 10-03-2024

Hello,I've couple of questions in this regard,Once these recordings are enabled, what's the max size of these recordings will be saved?Do these recordings get overwritten after reaching the maximum size?Is it possible to enable these recordings using...

SamUrai · 08-16-2024

Hello,Does CIMC on C220M7 (standalone) support SSD/HDD health ( with MRAID12G controller and alert if they are not healthy?UCSM has Smart SSD and I don't think UCSM support HDD health.Thanks

SamUrai · 05-29-2024

Hello,Does anyone know what this OID mean and where to find its information. I couldn't find it online.Please advise, Thanks

SamUrai · 06-05-2023

UCS 480M5 with VIC 1455 (4x 25Gb links) and N9K TORs. The UCS server runs Oracle DBs on RHEL82x N9K switches have been vPC LACP (active) mode. From server side 2 links, VIC ports 1&2 go to switch 1 and 3&4 go to second switch. PortChannel on the VIC ...

SamUrai · 07-15-2024

Thank you for sharing the information and the bug. I've seen uneven network traffic on FI with VIC 1455 on UCS servers running 4.2(1n).This bug only relevant if VIC hardware port channel is enabled and not otherwise. Is that correct?

SamUrai · 05-30-2024

I saw this OID in a trap which came from a VPC-DI host. Thanks

SamUrai · 06-07-2023

Yes, I understand now that only one LACP over the same interfaces is possible.. Learned it a bit hard way ... my network guy didn't know that either lol..As I don't want to put burden on OS by adding tagged bonds I prefer having vNICs instead with de...

SamUrai · 06-06-2023

Ok I think having 2 LACP bonds on the server side is not good. That could have caused the port channel flapped. I changed the second bond to 2 ((balance-xor), it came up okay. Based on RH documentation, mode 2 requires a static aggregate i.e. non-...

SamUrai · 06-01-2023

PCIOrder thing still doesn't make sense to me. UI show PCI slot number which goes on increasing as you go on creating vNICs e.g.. 0-17 and a number gets chosen for each vNIC. In my case, 4 vNICs created has PCIOrder 0.0. 0.3. When I tried to create...

Member Since	‎03-02-2020 06:06 PM
Date Last Visited	‎10-08-2024 03:50 AM
Posts	49
Total Helpful Votes Received	25

User Statistics

User Activity

Download Inventory using Api

UCS CIMC - Boot/Crash recordings

SSD/HDD health on C220M7

ciscoMgmt.780.0.1.1500

LACP bonding issue

Re: Cisco VIC EtherChannel Performance Notes

Re: ciscoMgmt.780.0.1.1500

Re: LACP bonding issue

Re: LACP bonding issue

Re: vNIC - PCIOrder - How to find out about it?