Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a ASA 5525-X appliance. I have 5 VoIP Cards that need to be programmed with external IPS (38.84.x.x) so i cant program them with a internal and then Nat they all need to have public facing IP address programmed on them. They sit behind my fire...
I have Deployed a ASAV in Azure infrastructure I have logged into the ASA through the management interface with the public interface thats was created when it was deployed . I want to use gi0/0 as the outside interface. I configured the NiC-1 with a ...
Hi im trying to forward a 888 number to a 973 so when i get the sip call to my as5400xm gateway i can forward it to 973 number. Im not sure how to edit my dial peers for this. Forwards call from 888 the Main office ...
Hi im having a issue on my VG224. When im making a outbound call i get dialtone no issue i dialout then there is about a 15 second gap of silence before i hear ringing or ringback on the line then everything else works fine 2 way audio no issue and a...
Hi im trying to get a idea for a basic config for VG224 for 24 analog phones basic SIP standalone gateway way no Call manager. Just need basic inbound and outbound calls to 24 analog phones there is no pbx everything is interconnected at the 66 block...
These are the rules and Dial peers in place what we need is just one number to route to 9732188000 so the clients that call the 888 number route to a external location number (9732188000) and not to where our pbx is. voice translation-rule 1rule 1 /8...
There is no pbx no cucm 224 is acting like a standalone SIP gateway . So it’s SIP provider—->Vg224——->66 block———>Analog phones. Everything is working normal inbound outbound the only thing is the delay I believe it has to do with my outbound Dial pe...
I read that you can use VG224 should be able to work with SIP carrier. These are old analog phones and don't need any features like call forwarding caller id call hold etc. They just need to be able to receive calls thats its basic. There connected t...
