Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just spun up a new Cat Center appliance and am trying to onboard our 9800-WLC in a brownfield scenario. It appears that ping reachability between the 2 devices uses the "Cluster Virtual IP Address" setup during maglev which is failing. So my questio...
We installed new CBS-350 switches in place of older Cisco 3750's in a healthcare setting. We are having problems with an Ultrasound device picking up interference or feedback while connected to the CBS-350 interface. If the Ultrasound device is conne...
We are currently at ISE v2.4 and want to get to v3.2 with the least amount of downtime, so we decided to spin-up a new ISE Vm using ova files. Based on the install guidelines we have decided on (2) Medium-Large boxes. There are 2 different files in ...
I'm trying to run a script from the devnet python code samples and continue to get the following errrors while trying to modify an ip address on an interface:What IP address do you want to set? 192.168.40.1What Subnet Mask do you want to set? 255.255...
I tried to figure out how to delete my post after I found my own solution but couldn't find a way to delete it so I thought I'd just post the solution. And of course its part of the old saying RTFM. You can change the Cluster Virtual IP Address with...
The Ultrasound device is on the correct vlan and can communicate with the servers it needs to send images to and from. But because the device picks up interference from the switch while connected, it must be unplugged from the switch while making the...
One other question on this same thread if I can Rob .... We are using VmWare 8.0.2. I don't see anything in the documentation for the newer version (just ESXi 6.7 or 7.0).
