About antyeung

antyeung · 06-23-2014

I'm writing several methods to add gateways and gateway endpoints and I'm noticing inconsistencies between what are advertised as mandatory and optional fields in the AXL schema versus what I'm experiencing when I post content to the CUCM AXL interfa...

antyeung · 06-05-2014

I'm using the getGateway request method to get the gateway configurations from one cluster and then importing the gateway configuration to a target cluster. One thing I noticed is that the getGateway method returns multiple "subunits" elements under ...

antyeung · 07-11-2012

From the Cisco documentation the 69xx model phones should now support multiple calls per line appearance starting with 9.2(1) firmware for SIP.RN 9.2.1 - Multiple Calls per Line Appearance http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/6921_694...

antyeung · 04-14-2016

You may also want to check what your E911 requirements are as well. Normally customers use STN's from the voip location that has the same physical location as the person making the call so that when the PSAP gets the call the proper physical address ...

antyeung · 04-14-2016

You may need to contact Verizon to check what the concurrent call or burst is configured for the voip location associated w/ the STN. If you are using a STN from a VoIP location that has a limit of 50 calls as an example, all calls that use that part...

antyeung · 04-14-2016

You can use a single STN in the diversion header for all sites. But one thing to be aware of is that Verizon may bill all calls w/ this diversion header to the VoIP location associated to the STN. You may also need to consider whether your environme...

antyeung · 06-26-2014

Geevarghese,Thanks for your response.So is the callingPartySelection element supposed to be an optional or mandatory field?Thanks,Anthony

antyeung · 06-10-2014

Adrienne,Thanks for looking into this and identifying the issue. Please do. Is there a DDTS that I can track for this?Thanks,Anthony

Member Since	‎08-23-2006 12:13 AM
Date Last Visited	‎02-24-2021 01:38 AM
Posts	263
Total Helpful Votes Received	40

User Statistics

User Activity

addGatewayEndpointAnalogAccess AXL schema

AXL getGateway returns multiple "subunits" elements

69XX support for multiple lines for SIP Firmware 9.2(1) on CUCM 8.6

You may also want to check

You may need to contact

You can use a single STN in

Re: addGatewayEndpointAnalogAccess AXL schema

Re: AXL getGateway returns multiple "subunits" elements