Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi There, I have recently installed a 2140 FPR Device running ASA Code to increase our VPN Client base. In setting up the DHCP Clients pools leases I have been allocated a /20, 4096 Devices to use from our allocation dept. I have looked all over a...
Hi There,
We have just got Prime 3.2 up and running, collecting data from our 5520 WLC's running multiple SSID's
I have found a great report from the launch pad which allows me to see all the unique clients connected to any AP's on a given day.
...
Hi All, Currently we have 2 certs in ISE, 1 signed by global sign for the portal, and another internally signed by our internal CA for EAP-TLS. the issue I have is that the BYOD devices dont have the Internal CA root cert installed, therefore faili...
Currently we have 2x WLC 5508 in HA, we have reached our capacity of 500 AP's and looking to purchase 300 more AP's
Is there anyway to scale this up using more 5508's as we have another couple in the stores we could use if possible?
I dont want to ...
Hello All,
I have a situation where I have two floors of a building with 3x AIR-LAP1141N-E-K9 LAP's on each floor, my WLC is version: 8.0.121.0
The floors are 2 and 3, the problem being is that some users seem to hop from floor 2 AP's to the Floor ...
Hi, we had the same issue, backup would not work after patch for ISE was installed.
TAC made the following changes:
Problem Description:
ISE backup was stuck and not progressing forward even though the repository was accessible.
Resolution Summ...
Hi All, We have a BYOD portal setup already for guest wifi, with a very strict ACL. this works great, I should probably explain what I am trying to achieve. I have ISE Setup connected to my domain. I wanted to connect devices to the corporate SSID ...
HI Francesco, many thanks for replying and clearing up publicly signed certs are not recommended. My issue is that we have an SSID set up in Wifi that uses EAP-TLS (MSCHAPv2). the profile in ISE matches the airspace ID, and uses the MS Active directo...
Thanks Scott, I thought as much. We already have around 10 mobility anchors set up in our current HA Pair, so another pair attached via mobilitty would indeed as you say look really messy. As we would have to set those up again in the other HA Pair.
...
