Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, I am running Version 8.5 on WLC 5520, I understood that there are 4 profile on the WLC which can be configured, but my question is: Is QoS trusted by default on WLC or not?
Hi all, I must implement QoS on a 5520 WLC already working in local mode, I am new to QoS on WLC and I can't find much on the web. Any help for a usefull guide of how to configure QoS on WLC? I know differences between DSCP, ToS, CoS, and DSCP is alr...
Hi all I should trust DSCP and CoS on SW 2960x version 15.2 in stackwise for all traffic coming from and to the Access Points, I have a WLC working in Local mode, unfortunatelly I don't I don't know QoS that well especially in wireless deployments. ...
I am trying to download Cisco VPN client AnyConnect but I can't, is AnyConnect free or do we have to pay. I am emplyed to Cisco partner enterprice and I have associated my account, but still looks like I don't have enough priviledge to download AnyCo...
Hello,
I am trying to load IOS XRv on my EVE-NG lab but the boot wouldn't execute, as a resoult I receive the logs below:
Unable to access "/dev/ser1" (2)
Restricted Rights Legend
Use, duplication, or disclosure by the Governmen...
Thank you very much so from what I understood even If wireless client device is WMM capable therefore classify its application traffic into one 8 UP, WLC won't let packet go trough the network with the roght DSCP unless we configure a profile? In sum...
Dear valorous helpers.
Below I've pasted the conf of the 3 routers, as we can see again from R333 we receive network from PE but can't ping
PE#sh runip vrf davide rd 1:788 route-target export 1:788 route-target import 1:788!!!interface Loopback0 ...
The topology is pretty simple, I am trying to reach a network two as path away, I've created a very basic lab in EVE-NG where from AS 3 I try to reach a network in AS 1, they belong to different vrf so I've done route leaking, there are no policies ...
Thank you for the suggestion, although i had already installed the XRv through the link from you adviced, the image still wouldn't load.
I am also getting the logs below:
Sep 27 15:17:25.315: Install Setup: Install Setup (pid 524321) has failed ...
