Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Firstly, CUCM 11.5.1.12900-21CUC 11.5.1.12900-21 As I'm sure everyone with a PSTN connected phone is aware SPAM callers and spoofing are pandemic these days.Within our org which has over 1000 DIDs we are getting an increasing number of complaints and...
I recently updated my ATA-187 units to 9.2.31 to see if it would eliminate some stability issues with devices becoming deregistered and having to be manually power-cycled (without POE this lack of control is frustrating). I enabled the new SSH login...
Hi All,****Let me preface this question by saying, I know this may be a fools errand, best addressed through class management, etc. Please just speak to the feasibility and technical hurdles. There may be other applications with the same goal with di...
Hi All,This is purely an FYI type post because I think it could be of help to some folks that might have experienced this without realizing the cause.I'm also posting it because any time I've described it to industry folks they say they've never hear...
Hi,We purchased a Cisco/SciAtl D9022 encoder from our gold partner with a DMS solution. I cannot locate the MIBs for this device anywhere on Cisco's site or the net at large.Can someone provide a link to the MIBs for this device or a generalized on t...
James, Your suggestions work perfectly. I thought I had tried them but not in the exact sequence you noted. The POE negotiation confusion makes sense. Thanks!
I consider this a non-reply reply from Cisco. Obviously it's going to work with the manufacturer suggested device produced by the manufacturer. The question being asked in this whole thread is, why is the AP incapable of working with a different 802....
I have the same problem with Startech POEINJ4G 4-port injector. It is able to provide 30W to all four ports but with the two 2802is I have connected they only draw AF power and will not turn on the radios. I have tried Injector Override and turning o...
Thanks for another thorough and illuminating reply. Not messing with the Callmanager certs is a big relief. I had a feeling there was no real reason to be messing with those just to eliminate warnings on the user end.
