About rrobles007

rrobles007 · 11-26-2014

Hello,i'm having inbound call setup issues and hoping someone might be able to point me in the right direction.. its been a while since i worked on a Cube. I have a 4 port FXO card on CUBE with VOIP dial peers pointing to a Microsoft Lync 2013Any hel...

rrobles007 · 01-23-2014

Hello,we have an issue with our cube and know what we need to do but do not know how to implement.When a call comes in as ANONYMOUS via SIP, the call is rejected, this is due to a translation pattern on CallManager that adds 9+1 to inbound call logs,...

rrobles007 · 09-08-2012

Hello,I'm brand new to SSL VPN and I'm a bit lost... I've been trying to get SSL VPN going for our company and we've been asked to deploy a completely client-less solution that will allow access to our network based on subnets. Is that possible with ...

rrobles007 · 10-12-2011

Hello Cisco experts,I had a question about how to use a loopback address as the IP address that is used for registering the GW to the CallManager.Right now the GW uses the ip address of the LAN interface but that will be changing soon and the new LAN...

rrobles007 · 06-28-2011

Dear cisco experts.. I have a project that i'm experementing with. I have Cisco Callmanager with an H.323 trunk to an Avaya. Is it possible to add extensions off the Avaya PBX onto our Cisco phones that are currently registered to the Callmanager? th...

rrobles007 · 12-01-2014

outbound from Lync to PSTN (through the CUBE is working now)inbound from PSTN to lync is still not working and latest debug now shows i'm sending the digits correctly: i'm sending calls to 8409@gopro-test.com *Dec 2 02:13:34.838: //-1/xxxxxxxxxxxx/...

rrobles007 · 12-01-2014

Hello Ayodeji,as always, thank you for your reply.. very much appreciated.. I see exactly what you're referring to now but i can't seem to remove the subdomain? i've made a few changes and it still adding it to the inbound call? Would you mind taking...

rrobles007 · 11-27-2014

actually it looks like i'm sending it to the correct domain now.. looks like i'm trying to send 4 digits successfully now? To: <sip:8409@dev-lync-01v.gopro-test.com>;tag=f9a118d9ebDate: Fri, 28 Nov 2014 00:48:28 GMT

rrobles007 · 11-27-2014

Here you go Oyodeji,i've changed the dial peer and i can ping the domain: !dial-peer voice 7 voip translation-profile outgoing toLync huntstop destination-pattern .... rtp payload-type comfort-noise 13 session protocol sipv2 session target dns:dev-ly...

rrobles007 · 11-27-2014

this is what the outbound addressing looks like on a successfully made outbound call from lync client: SIP/2.0 200 OKVia: SIP/2.0/TCP 172.16.12.28:53098;branch=z9hG4bKbae15049From: "u1"<sip:6503128409;ext=8409@gopro-test.com;user=phone>;epid=96A38471...

Member Since	‎08-09-2006 12:55 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	31
Total Helpful Votes Received	9

User Statistics

User Activity

CUBE Help please! VOIP dial peer to Lync

Need to convert anonymous inbound SIP calls to 10 digit mask

New to SSL VPN, Can I tunnel specific networks without specifying application list with Smart tunnels??

Using a Loopback to register Voice GW to CallManager

need Voip assistance from an Ivy League resource :)

outbound from lync client to

Hello Ayodeji,as always,

actually it looks like i'm

Here you go Oyodeji,i've

this is what the outbound