About port.islander

port.islander · 03-11-2021

I thought I could use CUBE and CME on the same router, but I am struggling to get it to work.Both work on their own:a) I configure the sip trunk to the provider using sip-ua. I can register successfully and see inbound PSTN calls coming in. or I don'...

port.islander · 08-05-2020

The official cert guide for the CCNP ENCOR exam states:Root dispersion = the calculated error of the actual clock attached to the atomic clockPeer dispersion = the root dispersion plus the estimated time to reach the root NTP server Here is what conf...

port.islander · 03-13-2021

If someone wants to do the same for SIP phones:There is no no-reg in voice register global, you only configure it in the dn:voice register dn 1 number 1001 no-regIf that doesn't work...In my case, the router still sent the registration of the phone...

port.islander · 03-13-2021

Very good. Had to adapt the solution from Skinny to SIP phones and it would not stop without a reload of the router, but it works now. Thanks a lot!

port.islander · 03-12-2021

Thank you! It was helpful to see the configuration with the dial-peers. However, I could not get CME configuration to work without the global binding and tenant configuration as suggested by @Spooster IT Services . It's interesting that in your examp...

port.islander · 03-12-2021

Thank you! Yes, I tried the tenant configuration and it works well. It's interesting that there seems to be a disagreement whether the global bind is needed for CME or not. During my testing, I could only get CME registration to work if indeed I had ...

port.islander · 03-12-2021

Wow, amazing... The tenant configuration allowed me to solve the problem with the binding conflict and now it works.I can receive and place calls to the PSTN via the SIP trunk from the phone which is registered with CME. Perfect. Thank you so much! I...

Member Since	‎08-05-2020 03:23 AM
Date Last Visited	‎03-28-2021 06:07 PM
Posts	7
Total Helpful Votes Received	5

User Statistics

User Activity

CUBE and CME on the same router: How to set source-interface per dial-peer?

What is NTP peer dispersion?

Re: PHONE IS TRYING TO REGISTER WITH ITSP AS AGAINST CME

Re: CUBE and CME on the same router: How to set source-interface per dial-peer?

Re: CUBE and CME on the same router: How to set source-interface per dial-peer?

Re: CUBE and CME on the same router: How to set source-interface per dial-peer?

Re: CUBE and CME on the same router: How to set source-interface per dial-peer?