Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everybody,I have WLC 9800, IOS 17.03.04cAll APs correcty joined to WLC (about 167), type 1852. I was migrating these APs from old WLC-5508 to this new one. I configured two locations (SSID-ALL and SSID-NO-ALL) WLC-9800#sh ap location statsLoca...
Hello Readers,UC520 with Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(11)XW7, RELEASE SOFTWARE (fc2)Problem is in redirecting calls.We have telephone plan 271 001 2xx = 99 phone lines Our telephone xxx xxx 224 is for hot...
Hello to forum,I have network with 100 switches - 8x L3 switches with 10G ring.On main L3 switch is logged a lot of host flapping issues - more than 4500 in a day.Main switch version:Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Softwa...
Hello cisco specialists,I supervise on LAN network and it seems that cpu has high utilization - even at night, when nobody is at work!Somebody with same problem or anybody who good give me some tips?Sa Miss : The behavior changed in Cisco IOS Release...
Hi Arshad and thx for reply,* I build new WLC.* I create 2x location under GUI * Then I migrate from old 5508 WLC to this new WLC approx. 167 APs (for 5pcs at once)* 5 by 5 APs were joined to default location* I go under location I created and move M...
unfortunately I found out a lot of things that can be improven on this new WLC 9800.For example:* Number of Clients in 5508 was on every row together with AP's name when u go in GUI under "Wireless tab", in new WLC there is in main dashboard Top 10.*...
Hello Flavio and thx for reply,yes, i created two others AP join profiles then default profile is.When AP joined to WLC, it go under "default-ap-profile" where are default tags (policy + site + rf).Then I go in GUI under Wireless setup -> Basic -> (f...
Old 2960G (12.2(55)SE12; 12.2(58)SE2...etc) hitting this bug too, when using switches like new 9200L in same network which sending ICMPv6, DHCPv6 packets.9200L version 17.3.3 hitting too. When using 2960 as main switch on building, access switch afte...
Hello,it could be problem with clock in FMC. FMC -> System -> Configuration -> Time Synchronization -> Set My Clock (via NTP from) and set IP address of NTP.Steve
