Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 871w connected to a cable-provider in Vienna, Austria.The speed should be 16384 mbit download, 1024mbit upload. But I only get something like 3 mbit down, sometimes peaks of 5 mbit.I run the test with an ISP-provided testsite (1MB file per P...
Hi! According to http://www.cisco.com/en/US/products/hw/routers/ps380/products_data_sheet0900aecd8028a976.html my 871w supports two MBSSIDs, so I could give both of my wlans a different broadcasted name.I have a current c870-advipservicesk9-mz.124-11...
Last week I was sitting in an hotel far away from my family. I wanted to use Skype or MSNMessenger to contact them with Webcam. It didn't work, because there was some huge firewall, blocking several ports. So I decided to setup a VPN server @home, so...
Hi! I have one wlan-ssid on my 871w working for a while already, but it is only encrypted by WEP. I use a Palm Tungsten C organizer, which is only capable of WEP, no WPA possible. With this PDA, I'm using it only for internet-access, no local LAN acc...
This is a rather complicated question...Following situation: I have to establish a vpn-network between 5 routers, as seen in the attachment vpn.jpg. Currently, only the yellow routers are installed, with configs as seen in the attached files run_10.t...
My config on my 871w:================================interface Dot11Radio0 no ip address ! encryption vlan 10 mode ciphers tkip ! ! ssid myssid vlan 10 authentication open authentication key-management wpa wpa-ps...
No, sorry, it didn't work.My facts:* I have IOS 12.4(11)T1* According to the link in my first post, my Router 871w is capable of two MBSSIDs* I have VLANs configuredSo, I guessed it could be possible to broadcast both my SSIDs (one private with WPA-P...
Yes, this helps already. I now know it is possible. Theoretically. Finding documentation and features of IOS is a PitA...Now I have to go and look for the configuration I need...
I tried to solve my problem, but didn't get much further yet.But: I picked up something about NAT and split-tunneling, which does make sense to me...Can someone help me with the problem described above, maybe with a solution with split-tunneling? The...