Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Can CW-9166I be connected to the C9300L Wireless Controller if C9300L is connected to an HP Core Switch and working on L2 Mode with multiple VLANs? Is there a document to do that?Thanks.
Hi,Is it possible to use the wireless LAN controller in 9300L without enabling routing on it? The switch works as an access switch with multiple VLANs and is connected to an HP Core Switch.Thanks.
Hi,I am getting the below message while enabling WLC in 9300L.Error in Configuring Configure Wireless ControllerWireless package not installed, please install it before activating wireless functionalityThanks.
Hi,I need to connect C9300L to an HP Switch to forward vlans traffic. The management vlan is vlan5. HP Switch configuration is as follows. There is no configuration in Cisco 9300L Switch at the moment. I also want to use C9300L as a wireless controll...
I can reach vlan 29 from Cisco Switch now but the pc connected to the access port is not able to reach and get the IP address from the DHCP server configured in the core switch as a DHCP-helper.Any Suggestions?
Hi,Yes, I have removed interface vlan 29 but I need vlan 29 because the users will connect to Cisco Switch and use vlan 29. The HP Switch configuration I posted is for an access switch between HP Core and Cisco. All the VLAN routing is through the HP...
Yes, I can reach the HP Switch now but the pc connected to Cisco is unable to get the ip address from the DHCP Server configured as a DHCP-Helper in HP Core Switch for vlan 29. Here is the config now.Switch#sho running-configBuilding configuration......
No. Cisco switch is an access switch. Not working after configuring Cisco Switch. Current configuration : 9945 bytes!! Last configuration change at 23:00:16 UTC Mon Jan 22 2024!version 17.9service timestamps debug datetime msecservice timestamps log ...
