About moj_ccie

moj_ccie · 08-18-2024

Hello community usersI've been using ACI Fabric in our SD-DC in Network Centric model ;In my migration plan and proposed design, I've faced some practical concept such as "Consumed Contract Interface";If my contract provider is in another tenant, sho...

moj_ccie · 02-06-2023

Hello ThereI have 2*Spine (C9332) & 12*Leaf (C93180) in Bank Data Center.I want to connect each leaf to spine with two phys. links;There are two solutions:Port-Aggregate Links in Leaf & Spine (One L3 Link- LACP)L3 IP Add. Assign for each phys. link (...

moj_ccie · 02-04-2023

Hello ThereI have 2*Spine (C9332) & 12*Leaf (C93180) in Bank DC.I want to connect each leaf to spine with two link;There are two solutions:Port-Aggregate Links in Leaf & Spine (LACP)L3 IP Add. Assign for each phys. link (OSPF Participate & Neighbors)...

moj_ccie · 05-15-2022

Hello there We have bought 20x Switches: C93180YCAll Fans are working in Back-to-Front direction in real world & operation correctly, BUT when I run "show environment fan detail", some switches have wrong direction status (Front-to-Back !!!)For Examp...

moj_ccie · 06-14-2021

Hello There I've bought Nexus C9332 / C93180YC (s) with NXOS-ES-XF License (NX-OS Mode)We Config fabric with DCNM...BUT NOW We want to migrate and convert to ACI-ModeAfter we convert nxos to aci in nexus (ACI image from APIC) Then What will we do ? H...

moj_ccie · 02-14-2024

Exactly Thanks

moj_ccie · 02-14-2024

Hi ThereWith my account in "Cisco Commerce Workspace"Also you needed to buy APIC Cluster

moj_ccie · 02-12-2023

Thanks, I agree with you because of:- Cisco DCNM/ Fabric Controller & ACI Build L3 independent Interface (Maybe it's Cisco best practice !)- When I use Port-channel and one link in Port-group fail, OSPF has no idea and feedback of this failure & ECMP...

moj_ccie · 02-06-2023

Hello, It's completed in these mechanisms (Q1 2023):gtpu: IP and GTP-TEIDinner-header: Inner headerip: IPip-gre: IP, GRE keyip-l4port: IP and L4 portip-l4port-vlan IP: L4 port and VLANip-vlan: IP and VLANipv6-flow-label: IPv6 Flow Labell4port: L4 po...

moj_ccie · 02-06-2023

Hello, These features & commands will help you:- switchport nonegotiate ( Reduce DTP Time)- spanning-tree portfast or spanning-tree portfast edge (on Interface and Portgroup)- lacp rate fast (Fast Mode)

Member Since	‎11-04-2020 03:37 AM
Date Last Visited	‎08-18-2024 01:39 AM
Posts	18
Total Helpful Votes Received	1

User Statistics

User Activity

Cisco ACI CCI Usage (Consumed Contract Interface)

Leaf & Spine with Dual Link in L3 one Port-Aggregate Link Or L3 ECMP

Leaf to Spine with Dual Link in Port Aggregate

Nexus 9300 FAN - Wrong Rotation Direction

Migration License From NX-OS Mode to ACI-Mode

Re: IP Address Change - Virtual FMC

Re: Migration License From NX-OS Mode to ACI-Mode

Re: Leaf & Spine with Dual Link in L3 one Port-Aggregate Link Or L

Re: LACP Load Balancing Method

Re: LACP time to converge