Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have been experiencing a number of Windows endpoints failing 802.1x authentication with the failure reason of "12535 The EAP-TLS session ticket received from supplicant is expired". When this occurs the endpoint's Wired Event log shows this ...
Hello,I am working on a new deployment of Catalyst Center 2.3.7.10 and the new Catalyst 9350 switches. I have used PNP to onboard the switch to catalyst center, assigned hte switch to a site and then provisioned the device which pushed down the inten...
My security team has asked us to verify that this vulnerability was not exploited before we installed the update. Are there any known ways of verifying this was not already exploited on a system before the fix was installed?
Hello, Hoping someone could offer a creative or easy solution to a problem I experienced this morning. We have an ASA5516 running 9.8(3)29. It has a dedicated internet connection connected to Gig1/1 and layer 3 switch on the INSIDE interface. The ...
Hello, I am wondering if anyone has experience working with the Canon IP Fax Expansion Kit and integrating this with Call Manager. I am able to get the IP Fax kit to registered as a generic SIP device to Call manager, and i'm able to make successful ...
Hey everyone, i forgot i had posted about this issue.i was researching a different problem and came across these two lines of config that instruct netconf-yang to use the different method lists. lines are:yang-interfaces aaa authentication method-li...
I'm experiencing this issue as well. We have both 5508 and 2504 WLC's in our environment.
TAC is telling me the same new WLC code will work on both the 5508 and the 2504. the file they gave me was named "AS_5500_8_0_152_8.aes"
does anyone have e...
Hi everyone, I had a similar issue with this. I just posted my working configuration here: https://supportforums.cisco.com/t5/lan-switching-and-routing/can-t-get-l2nat-to-work-cisco-ie-2000-switch/m-p/3370145/highlight/true#M412094