fermiwu8888
Beginner
Beginner
Member since ‎04-15-2019
‎09-15-2022

User Statistics

  • 15 Posts
  • 1 Solutions
  • 30 Helpful votes Given
  • 5 Helpful votes Received
Recent Badges
10 Helpful Vote
1 Accepted Solution
1 Helpful Vote
5 Replies

User Activity

求助给位大神:命名模式下的EIGRP ,在 IPV4地址族下,如何修改默认为5的管理距离我在普通数字进程模式下,可以找到修改办法  R(config-router)#summary-metric 0.0.0.0/0 distance XXXX;但是在命名模式下的汇总接口,汇总接口后面没有跟distance :R(config-router-af-interface)#summary-address 0.0.0.0/0 ?leak-map Allow dynamic prefixes based ...
求助各位大神:我在ASA5525-X (PPPOE拨号,获取公网地址),以TCP为例(UDP一样不通):对单个TCP端口映射,外网可以访问服务器,按如下做端口组后,不通:object service TCP6632_6642service tcp destination range 6632 6642object network server01host 172.16.143.63nat (inside,outside) source static server01 interface serv...
初始化的时候设置允许YES, 现在想修改成NO,搞不清楚命令行和图形化界面的位置 ,没找到 ;求助大侠
求助大佬:VWLC AIR_CTVM-K9_8_10_151_0,安装到vmware workstation后,适配器1使用默认桥接物理网卡,适配器2 配置为虚拟网卡--management地址,未打TAG
求助各位大侠:手头上有台Cisco 7960 phone,模式为SCCP; 想升级为SIP,并下载了固件包,编辑了SIPDefault.cnf 和 SIPMAC.cnf文件; 但是在刷机的时候遇到2个问题:1、话机无法通过加电按#,完成初始化 接电开机后(不接网线) 只有两行信息 Cisco Systems.inc 和 Copyright2000; 可用按键为settings; fireware versions: Application load id:P003AM30; ...
Community Statistics
Member Since ‎04-15-2019 02:43 AM
Date Last Visited ‎09-15-2022 02:12 AM
Posts 15
Total Helpful Votes Received 5
Helpful Votes From
Helpful Votes Given To