Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello team,As someone who only has experience with Meraki WiFi and classic Cisco solutions, I need some advice regarding new Meraki setup. We plan to implement completely new network and because the building is still in renovation phase we would like...
Hi all,I have some questions about LWA, I configured everything and I get login page and can login and everything works fine. The problem is that I don't want to use 192.0.2.1 address for guest portal, when I set Virtual IPv4 Address to guest-wifi.co...
Hi all,I have question about Radio Configuration on 9800 model. When you go to Configuration > Radio Configuration you have multiple options like Network, Parameters, RRM... Similar options are also available when you create RF profile.So my question...
Hello all,I need some clarification about FUS upgrade, is it necessary in my case or not. We have Cisco 5508 WLC with old version 7.6.120.0, it is working fine for us, but finally it is time to replace some old AP's with 1850 and 2800 series. I want ...
Ok, it seems that is not possible - https://community.cisco.com/t5/wireless/webauth-redirect-dns-host-not-resolving/m-p/2050184If anyone has any idea, feel free to share it.
Hi @balaji.bandi We are using C9800-CL, we don't have local DNS and it is quite difficult for us to install and implement one to be used only for this. How can I make address like 192.0.2.1 to be resolved by Google?We are using LWA, where guest usern...
We had the same problem other day, we were doing upgrade from 8.5.131.0 to 8.10.185.0, but same message whatever you try - Transfer in progress by another user. We used SolarWinds as tftp server and there was also message that transfer just started, ...
Ok guys, I don't know how I missed it in the first place, but I found some official document...RF Profiles in AireOS allowed selective override over a subset of AP’s RF and RRM parameters from the Global configuration level. When assigned to an AP gr...
@Leo Laohooour wireless network design is same for all locations. All APs are tagged with same tags/profiles. Custom RF tag is created and applied as well, so we are not using any default tags.Like Rich said, question was will specific parameters ove...
