cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1362
Views
1
Helpful
5
Replies

vWLC - webauth (DNS resolve)

Trbo90
Visitor

Hi all,

I have some questions about LWA, I configured everything and I get login page and can login and everything works fine. The problem is that I don't want to use 192.0.2.1 address for guest portal, when I set Virtual IPv4 Address to guest-wifi.com, clients can't reach it, because they can't resolve it. As we use public DNS servers it is not possible to create record there. Is there any way to make it work, maybe some type of mapping of guest-wifi.com to 192.0.2.1 on WLC itself?

5 Replies 5

balaji.bandi
Hall of Fame
Hall of Fame

it should be resolvable - either you need to use local DNS or make sure it resolved by Public DNS like google.

not sure what WLC - check how the process works :

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/217457-configure-and-troubleshoot-external-web.html

 

BB

=====️ Preenayamo Vasudevam ️=====

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hi @balaji.bandi 

We are using C9800-CL, we don't have local DNS and it is quite difficult for us to install and implement one to be used only for this. How can I make address like 192.0.2.1 to be resolved by Google?

We are using LWA, where guest username and password are generated on WLC and used for guest access.

Public IP is the key here - that can point to that domain, then you can point to Local Webserver Piblic to Local IP NAT.

 

BB

=====️ Preenayamo Vasudevam ️=====

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Trbo90
Visitor

Ok, it seems that is not possible - https://community.cisco.com/t5/wireless/webauth-redirect-dns-host-not-resolving/m-p/2050184

If anyone has any idea, feel free to share it.

Rich R
VIP
VIP

You can't register 192.0.2.1 in public DNS.
If you don't want to set up your own local DNS then your only option is to get a registered public IP (which you own and is not routed anywhere else) and configure public DNS with that IP.
Although the guides say you should use a private, non-routable IP - it's actually also fine to use a public IP as long as you own it and control the routing for it.  Then the public DNS points to that IP for the clients.
Remember your cert needs to match the registered DNS name for clients to trust the cert.

------------------------------
Please click Helpful if this post helped you and Accept as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
Review Cisco Networking for a $25 gift card