M.Fly
Level 1
Level 1
Member since ‎01-11-2021
‎05-26-2025

User Statistics

  • 40 Posts
  • 1 Solutions
  • 0 Helpful votes Given
  • 21 Helpful votes Received
Recent Badges
40 Discussion Posts
First Discussion
5 Discussion Posts
5 Helpful Vote
30 Discussion Posts
20 Helpful Vote
20 Discussion Posts
15 Helpful Vote
10 Discussion Posts
1 Reply

User Activity

Hi all,we have a Nexus 7004 and have activate the EVC feature.We have configured a Port-Channel to ingress some traffic, this traffic have a rewrite function to add a vlan tag on top on other vlan tag like this:interface port-channel22service instanc...
Hi all,we have a ISP infrastructure, where che customer is authenticated via PPPoE on a leased line, for example, a VDSL line.The customer have a PPPoE with a private IP address on the PPPoE Client.The virtual-template have a loopback with a Public I...
Hi,we have a ASR920 facing an ASR9K with 2 10G Link.We have configured Port Channel on ASR920 like this:interface Port-channel1description ***LAG***no ip addressno negotiation autoservice instance 1 ethernetencapsulation untaggedl2protocol peer stp d...
Hi,we have a C3850 24XS with a SFP+ module connected to a DWDM on 1310nm standard port, 10G.If the carrier shutdown the link, we have a down on port connected to DWDM, but we have optical power on RX, the same optical power with port in UP state.Spoi...
Hi everyone,i have a couple of UCS C220 M4 with a mLOM Cisco 1227 10G sfp+.I have linked this card to an ASR9K, directly, without a switch.The link on port 0 is UP, no problem on L1 10G, but on the port of ASR9K, no MAC Address is viewing, is not pos...
Community Statistics
Member Since ‎01-11-2021 05:24 AM
Date Last Visited ‎05-26-2025 05:54 AM
Posts 40
Total Helpful Votes Received 21
Helpful Votes From