About ceyerly

ceyerly · 06-03-2009

I have a question based on this link:http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/span.html#wp1042568If I have a 6500 as a L2 access switch with a dot1q trunk to the distribution, and I use VSPAN / local-tx...

ceyerly · 02-22-2007

First, the doc you are using is just about marking. You also need one about queuing.This link explains the command:http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps5207/products_command_reference_chapter09186a00801a7f28.html#wp1096142Once ...

ceyerly · 06-22-2005

We've seen the NO_RING_DESCRIPTORS error on different hardware. It was a DSP firmware issue. Code upgrade was fix for us. When we were having the error, calls would still setup, but there would be no audio as the DSPs were not functioning at the p...

ceyerly · 09-03-2004

The phone can read and write the vlan tag, but by default doesn't forward based on it. Also, the phones do not keep a CAM table. So, like a hub, all packets into the phone get sent out all of the ports. Theoretically, all PC traffic would be sent ...

Member Since	‎11-12-2002 11:47 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	4

User Statistics

User Activity

Local Egress SPAN with VSPAN

Re: QOS Question

Re: Voice calls dropping out

Re: Odd sniffer results when connected to PC port of phone