Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dears,I need to enable and configure session border controller SBC on my ASA 5520 firewall,I have concern if my firewall is cabable with SBC or not, the ASA Version is 8.3(1),We were not able to locate information on how to enable & configure SBC on ...
Dears, I need your help regarding implementation of IP-based VoIP connection between two Cisco 38xx voice gateways.The scenario is as follow:Two organizations have fiber connection between the two datacentersAn ASA at each site interfac...
HiI have Cisco Unified CM version: 7.1.5.10000-12. And I want to register cisco IPphone (SPA504G) on the CM, could anybody guide me how to do that step by step on both places (CM and the IPpnone itself).Regards
Hi Christopher,We have a policy that disable firewall on all connected PC's to the corprate network, wired clients can communicate to each othrt and to wireless clients in addition to wireless clients can communicate to wired clients, but the problem...
Hi Tom,Thanks you for your reply, Our problem is wireless client A cannot ping wireless client B (A and B are connected to same access point and same SSID), and wireless client A cannot ping wireless client B (A and B are connected to same SSID but d...
Hi Tom,We are facing same problem of client isolation, I downloaded INSSIDER application and found that RSSI value of SSID we are using is -47, could you please recommend a solution.Hussein IsmailThanksRegards
Dear Chris,You are right, CUBE is the unique solution for my problem, but I couldn't find any document that descripes how to configure CUBE with MGCP, so cold you please provide document or duidence of CUBE with MGCP configuration.ThanksRegardsHussei...