Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i have an issue where im failing to ping a natted address from the router, a Cisco 4221 with IOS XE Software, Version 16.09.05. the Exact same Configuration is working on a Cisco 2911 with IOS Version 15.2(4)M1 im able to ping the natted address.my c...
I have a WS-C3850-48T with a new Network Module 3850-NM-4-10G . the switch is running Software Version 16.3.6 .
the issue is that 2 of the 10G ports on the 3850-NM-4-10G nodule are not working, i.e Te1/1/1 and Te1/1/2, but Ports Te1/1/3 and Te/1/1...
I would like to setup an IPSec VPN, i have a challenge on how to do it because the Spoke device is behind a NAT device and also it uses dynamic IP addresses, can anyone point me to the right article that can help me to do this, or can help by the req...
HieI would like to buy Cisco Aironet 1260 Access Points, i just want to use them independantly so i want to know do they work without the Wireless LAN Controller? or i have to have the controller for them to work? they will be in different locati...
I have a new Aironet 1140N Access point , the model is number AIR-AP1142N-A-K9, my main problem in that i have Nokia E71 smartphones on the network, but they cannot connect to the Network, the Access Point SSID is not showing on the List of Available...
Thanks for the info, I currently have Aironet 1140s so is there another model that has the same form factor as the 1140 that i can buy and works without the WLC?what about the 3500 does it need the WLC as well?bonnie
but on the CISCO site i saw:Enhanced High-Speed WAN Interface Cards Enhanced High-Speed WAN Interface Card (EHWICs) are the latest generation of interface cards. EHWICs are installed in the EHWIC slot on the router. Legacy interface cards, such as W...
