Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have set up the TCL/IVR example "clid_authen_collect_cli.1.1.0.tcl" in flash and have the dial peer set up but it seems not to care about the script and just dials out as normal. I have tried about eveyr variation I can think of but to no avail. ...
Hello,Sorry if this is offtopic.I have all of the on and offramp faxing set up and for plain text it seems to work fine, but when I use a tiff attachment I get."docmsp_tiff_reader_data_process:(): The tiff engine failed for Call"Which from my searche...
Hello, I have all of the on and offramp faxing set up and for plain text it seems to work fine, but when I use a tiff attachment I get."docmsp_tiff_reader_data_process:(): The tiff engine failed for Call"Which from my searches says that it may be a m...
c5300-is-mz.122-24.bin For some reason anytime a call is made on the ISDN channels on the term mon and in my syslog it displays the connect and disconnect....of course this is pretty annoying when trying to find true warnings/errors is there a way to...
c5300-is-mz.122-24.bin For some reason anytime a call is made on the ISDN channels on the term mon and in my syslog it displays the connect and disconnect....of course this is pretty annoying when trying to find true warnings/errors is there a way to...
Yea, if you would have looked at the post it shows I have set up almost exactly the same as that and other docs. The problem wasn't finding an ambiguous link it was finding out why it is failing.
So you are saying it has to be different for *every* call? That would mean only 100 possible combinations. Or are you saying you need it to be different than the previous call?Are you supplying the ANI through voice port/dial-peer commands?
It is called hairpinning, and it is not supported on 5X etc voice gateways. It is only newly supported on some (3-4) models of 3XXX series routers.Without that solution crossing over voice ports is the only other way using cisco gear.Here is a write...
