Hi Im facing the problem of High utiliZation (99%)how i can resolve the issue i have take some logs which shows this but im not able to understand the logs
Hi ,In my MEN network , we have two links on is over microLan by using router of 100 mbps and another is through bridge of 2mbps using static routes for both links but inspite of increasing the AD of one static route(no routing protocols are used...
Pls Suggest some book for the switiching in which there is detailed examination and info for cisco switches should cover each and every topic must be present in Low Price Edition
How we can saw which ip is connected to which port which mac address. through sh arp we can got the details of ip ,mac and vlan details but not the port.
Hi amit ,Thanks for the link , I already through the link ,I run the command show processes cpu i got 99 % @ maximum utilization is by Cat4k Mgmt LoPr ,after trying show platform health maximum % is captured by K2L2 Address Table R by the document...
Hi Mike,I got the point tht using the routing protocol is best option , but i have a constraint tht im not able do so i.e looking 4 the option tht will provide backup option using static routes which will be automating the backup process.U r advici...
Dear Mike ,Im little bit confused , I saw the config in below hyper link, hope it will work but IP policy should be implemented on Vlan1(management Vlan) ?Pls suggest http://www.cisco.com/en/US/tech/tk364/technologies_configuration_example09186a...