Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am having an issue with AVC statistics on a foreign anchor setup using 9800 controllers.Anchor is on 17.3.6Foreign is on 17.9.3No data on the anchor for any of the clients connected via the foreign. Clients connected directly still show data.I f...
Hi,I have a C9800-L-F-K9 running on 17.9.2 code where not matter what WLAN config I apply within the tag, it will not broadcast on the AP.Issuing a "show dot11 wlan" directly on the AP shows no thing applied to radios:L02TEST#show dot11 wlanRadio Vap...
Hi, We have put everything in place in our network to make use of the intelligent capture feature to hopefully improve our remote wireless troubleshooting due to locations dotted all other the world.One thing we noticed is that for live data capture ...
Hi,We have a recurring report set up for threat reporting every Monday but it appears to be running every day at midnight as well the specified day/time. Therefore, the emails configured to get notifications are getting way more than they should.Also...
Hi,We use A HTML script to allow all domains to create guest account except the compny ones as explained in section "Restrict the email address entered when creating a known account" in the following post: https://community.cisco.com/t5/security-docu...
Tags are a mix of lower and upper case but they are applied to the AP using the dropdown in AP configuration on the WLC so it wouldn't be possible to the names in different formats as I'm picking from what the WLC has available.
Thanks. Checked all that and the errors are things I'm aware such as a tag that is no longer used and a misconfigured controller IP.Nothing relating to WLAN config.
All WLANs and policies in enabled state with broadcasting set to enable. I tried a test SSID and profile with only basic setting enabled but no luck.APs show as registed with no misconfiguration and "show capwap client config" on the AP displays that...
