Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have CIsco CME and CUE wiht 8841 phones setup as SIP.I am trying to configure a way to transfer calls directly into a users voicemail. I am aware that 8841 do not have the "TrnsfVM"But I was able to add an extra digit "8" in front of the extensi...
Hi,How do i set up a softkey button or without the button, transfer a call directly to a extension's voice mail without ringing the phone. All the phones are configured as SIP Phones and they are all 8841I have CME version 12
We have problem when a outside caller dials a DID # rule 4419xxxx756 the voice translation rule is not routing the calls to the users designated extension # it keeps landing to the catch all rule 21 /^.*/ /2100/ I have The PBX is in UK and the SIP...
When I looked at the Quick Guide document on the 1260, it showed that 2.4 Ghz external antenna connects to 1, 2 & 3 connectors and 5 Ghz external antenna connects to 4, 5, & 6 connectors.So, does that mean the you cannot connect (qty 2) 5 Ghz antenna...
I want to explain. When someone picks up a outside call and then they need to transfer the call directly to a specific extention voice mail. Because regular transfer, calls the extention and rings the phone. Jitu
Hi Roger, We were able to resolve the issue based on your response to this thread, pus from another thread you had responded to. See below what we did to fix our DID not routing to user extension. no voice class sip-profiles 1voice class sip-profiles...
