Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I "manage" a network quite a bit more complex than I could design and implement. Despite having managed to pick up a thing or two here and there, I can't quite get my head around the following:Two sites, a 6509 at each site.The 6509s are in 2 sep...
Hi,For a T1 link to 2 remote sites, our Cisco SE spec'd a 2951 with a HWIC-4T1/E1 at the remote end, and a 3925, also with a HWIC-4T1/E1 at the central site.In considering exactly how these things are going to connect, I've come up with some (probabl...
Hi All,We got some 2960 switches for the first time - previously we've gotten 3500s and 3700s, but since the intended use was only for switching, this time we went with the 2960.I just tried to see a mac address on one of the new 2960s, and found tha...
Hi All,I have to upgrade a couple of 4400s to support 1142 APs.The controllers currently support 1131s, and are on version 4.0.179.11. (I know, way back there...)Seeing this huge gap between the level we're on and the most current version, thought I...
Hi All,The network is basically dual 6509 cores, with a variety of 35xx, 37xx, 45xx switches trunked to the 6509s, and in some cases, stackables trunked to other stackables.Today, after 3 days of watching the packets counts on various trunk ports top...
As it happens, it's expected that I can do stuff like this for myself... Fortunately, I'm exceptionally risk averse, am not inclined to bash on just because off the top of my head I can't think of what could go wrong, and am make SURE that I kow ow ...
Good Grief! You'd have thought I would have stood some chance of actually seeing that command when I looked at "sh ?"...Anyway, thanks - That's definitely it...
OK, I was following that methodology, and making reasonable progress, but now I've run in to a mystery.I got to 4.2.205.0, but new 1242 AP still wouldn't connect successfully to the controller.I did "debug lwapp events enable", saw that the first err...
