Hi folks,I have some trouble with a End-to-End SSL configuration on my ACE...SSL Termination works like a dream, and with backend unencrypted traffic, everything works fine, but...I am trying to get some elements (using match http url) from another s...
Hi folksI have a 1131-AG accesspoint and a 4402 WLC running 6.0.182 software.I've configured the access-point as a H-REAP AP, and configured 2 local switched Wlan's and 1 central switched Wlan on the access-point.This worked fine - until I booted my ...
Hi allWe are planning a Carrier supporting Carrier environment with a Juniper Core network (Provider side), and Cisco 3750 Metro on the Customer Carrier side. What we are trying to figure out is if the 3750 Metro can support CSC with BGP label exchan...
Hello folks,I am trying to get a Fax solution based on the Dialogic softIP SIP environment working.My gateway has a E1 and a SIP-trunk to another gateway for another solution, and I have figured out that I probably will need some CUCME functionality ...
Hi folksI am having trouble with a fibre connection between a Cisco ME6524 and a Extreme Summit switch.I am using LX Single mode SFP's at both ends, but the link won't come up. If i set "speed nonegotiate" at the Cisco side, I get at link led at the ...
HiThis is probable due to old software on the ACE Modules.I had the same issue with A2(1) release on the ACE, but upgrading software solved the issue.Have a look at this link: - This states that A2(1.3) is the first supported release for VSS.http://w...
Hi folks,This is a really old thread, but with no solution....I am having the same problem between a Extreme Foundry and a ME-6524, but with LX interfaces.. My troubleshooting has been similar to the one referred to here, but no luck!Anyone got a sol...
Thanks.. I installed a 3750E between the access-switches and the 4510R and that solved all my network trouble.. Just to discover that we also have trouble with SAN performance.... L@rs
