Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi,i'm interested if it's possible to set the NTP server via DHCP on an 2901 Router with 15.2(2) image.i configured the interface gigabit 0/0 as dhcp client. The DHCP Server sends to me DNS, Default GW and NTP. All is working fine, but the NTP will n...
hi,i'm testing CME 8.6 and CME 9.0 with SCCP on my local LAN, no external calls possible (POTS, SIP, etc)my config:telephony-servicemoh music-on-hold.authe file music-on-hold.au is located in the root of the flash:what i not have configured is this c...
hi,i have a problem in a 3750, 3750x mixed stack. i replaced 2 pcs. 3750 with 3750x with no problem, but now we have a port config problemIOS 12.2(55)SE1the old config was:interface Port-channel1description UPLINKswitchport trunk encapsulation dot1qs...
hi,i have a 2901 with 15.2(2)M and one PVDM3-16 installed. I try to get working an ad-hoc conference but when i enter the commanddsp profile 1 conference maximum session <0-0>0 sessions? --------------------------------------------------------------...
Hi Guys,thx for your replies... the problem is that I would need the Base MAC Address of both 6880-X... and with show mac... show modules... I will get only the MAC of the active chassis, also if I change active/standby roles... the MAC remains the s...
try to connect a console cable and look at the logs from the AP...and you could try to test the cables with TDR... if you want...https://supportforums.cisco.com/docs/DOC-18983br Konrad
...answer from TACProblem Description:==================NTP via DHCP requestResolution Summary==================Current IOS implementation doesn’t support option 42 in DHCP client.
hi Adnan,i've tested it successful on an 2921 with Version 15.1(4)M3 (CME 8.6) and 2901 with 15.2(2)T1 (CME9.0) with 6945 and 6961 Phones. i've done it with languages DE and IT - not tested with TR!What i've done was following:1) create folder "its" ...
